Sharpening Hair Shears
Factory sharpening & repair services for all your hair scissors.
INCLUDED IN OUR SCISSOR SHARPENING SERVICE:
- Take apart Scissors and inspect thoroughly for any areas needing special attention.
- Disinfecting of scissors or shears from fungus and other bacteria
- Razor Sharp Honing and Sharpening
- Lubrication
- Minor repairs such as small nick removal
- Balance & Adjustment
- We also add or replace finger rings, washers, finger tangs, stoppers and more!!!
SCISSOR RECONDITIONING WILL RESTORE YOUR HAIR SHEARS. SOMETIMES HAIR SHEARS REQUIRE ADDED CARE DUE TO: IMPROPER SHARPENING, EXCESS WEAR, AND RUST.
Some sharpeners sharpen at the wrong angle destroying the convex edge which decreases the efficiency of your hair shear. We are able to fix this problem for you by re-convexing your hair shears to make the scissors like new.
When a shear becomes worn, it needs re-convexing to increase the function of the shear.
To avoid rust, keep your hair shears away from hair chemicals. Letting chemicals set on any part of your shears will pit the surface, even stainless steel can be corroded by strong chemicals. Be sure to rinse any chemical solutions from your shears immediately. Also keep them dry and clean.
INCLUDED: If needed, we will replace the Finger Rest or Tang, Finger Rings, Washers, and Bumper. NOTE: We have parts for most makes of professional hair cutting shears.
Japanese Hair Shears
Japanese Shears are the most popular type of hair shears. When compared to other types of hair scissors, japanese hair shears are by far the best type of hair cutting shears. Modeled after the Japanese art of sword making, Japanese shears are designed with the best type of stainless steel. Japanese cutting shears are razor sharp. The Japanese shears scissors steel alloy is built to hold an excellent cutting edge for a prolonged period of time. Japanese scissors can be designed with many different handle shapes. The most important part of Japanese styling shears is the convex edge. This razor edge is designed to slide through the hair without grabbing or pushing the hair. Japanese shears’ convex edge is a rounded type edge, opposite a concave edge. This precision edge gives the Japanese shears the ability to cut smoothly. Most cheaper and older shears are made with a beveled edge, which is a set angle and has no convex shape. The convex edge is far superior and guaranteed to last longer.
Avoid Problems with your Hair Cutting Scissors
Haircutting Scissor Problems
Author: Nadine Visscher
When giving a haircut, one of the most important tools are your scissors. If you have a great pair of haircutting scissors, it will make your job that much easier. With proper care, your haircutting scissors can last you a liftetime. Without proper care, however, you may experience a few problems such as –
* hair catching or pulling while you are cutting
* the hair sliding or moving towards the tips of your scissor blades rather than cutting
* hair being pinched or bent when you close the blades
* the shears feeling rough when you are cutting
You can address each on of these concerns with a good cleaning. When you are using your scissors, little bits of hair and chemicals can get around the screw and clog the pivot joint.
Cleaning Your Scissors
To clean them, wipe your scissor blades with a soft, dry cloth. Put a drop of oil between the blades and behind the set screw. Open and close your scissors several times to work the oil into the joint. The oil and the moving blades dislodge the hair bits that were stuck in the joint. Wipe the scissor blades with a soft dry cloth to clean off the hair and oil. Once you clean this area, the blades should be able to move freely, making it unnecessary for you to adjust your scissors.
If your scissor blades still feel rough after cleaning them, you may have damaged your shears and may need to replace them.
After cleaning your haircutting scissors, test them to see if they still need adjusting. If they continue causing problems where the hair is pulling, pinching, or sliding, you will need to adjust the tension.
Adjusting Your Scissors
Should you find that there isn’t enough tension and you need to adjust them, hold your haircutting scissors tightly in a closed positon, and press them down firmly on a hard surface. use a dime, a screwdreiver, or the adjustment tool (that came with your scissors) to turn the screw clockwise just a little bit (equal to 3 – 4 minutes on a clock face). You want to do this very carefully so you don’t damage the pivot screw.
If you have the opposite problem where the tension is too tight, follow the same steps, except turn the screw ever so slightly in a counterclockwise direction.
Once your haircutting scissors are adjusted to the proper tension and you are sitll having problems, you may need to get them sharpened. Be sure to get them sharpened by a specialist, someone who knows what s/he is doing.
With proper care, your haircutting scissors should last you a lifetime.
Article Source: http://www.articlesbase.com/health-articles/haircutting-scissor-problems-181037.html About the Author Nadine Visscher is the author of haircutting ebooks and has an great selection of both haircut videos and haircutting scissors.10 Ways to Get the Career in Hairdressing That You Want
Due to the hair and beauty industry becoming an increasingly popular career choice for many, it’s never been more important to do what you can to stand out from the crowd. Competition for jobs in hairdressing can be fierce due to the outstanding level of hairdressing talent found throughout the world. Whether you’re looking to open your own salon or find a hairdressing job aboard a luxury cruise liner, there are many things every hairdresser can do and services that are available to help you find and secure that dream job.
1. Keep learning.
It’s crucial that you continue to learn new skills not only in preparation of future opportunities but to continue doing your current job to the best of your ability. Styles and the industry change often and its important that you remain up to speed with the latest looks and techniques. Asking colleagues can provide experience based knowledge on everything from effective techniques to customer service.
2. Invest in yourself.
Many stylists choose to attend privately run courses. Courses on a range of hairdressing topics take place at locations across the country held by some of the countries finest hairdressing bodies including L’Oreal, Schwarzkopf and many more. These offer an excellent opportunity to stay in tune with latest trends. (more…)
Hair Scissors: Our Most Important Tool
When giving a haircut, one of the most important tools are your hair scissors. If you have an excellent set of haircutting scissors, it will make your job that much simpler. With proper care, your haircutting shears can last you a liftetime. Without proper care, however, you may encounter a few issues such as –
* hair catching or pulling while you are cutting
* the hair sliding or moving towards the tips of your scissor blades rather than cutting
* hair being pinched or bent when you close the blades
* the shears feeling rough when you are cutting
You can deal with each of these issues with a excellent washing. When you are using your scissers, little pieces of hair and substances can get around the screw and clog the pivot joint.
Cleaning Your Scissors
To clean them, wipe your hair scissors blades with a soft, dry cloth. Put a drop of oil between the blades and behind the set screw. Open and close your scissors several times to work the oil into the joint. The oil and the moving blades dislodge the hair bits that were stuck in the joint. Wipe the scissor blades with a soft dry cloth to clean off the hair and oil. Once you clean this area, the blades should be able to move freely, making it unnecessary for you to adjust your scissors. The oil and the proceeding blades disengage the hair parts that were trapped in the blades. Once you clean this area, the blades should be able to shift easily, making it unnecessary for you to modify your scissers.
If your hair shears still experience difficult after washing them, you may have broken your shears and may need to substitute them.
After washing your haircutting scissers, analyze them to see if they still need changing. If they proceed producing issues where the hair is taking, grabbing, or going, you will need to modify the pressure.
Adjusting Your Scissors
Should you discover that there is not enough tension and you need to modify them, carry your haircutting scissers firmly in a shut positon, and press them down strongly on a hard external surfaces. use a penny, a screwdreiver, or the modification device (that came with your scissors) to convert the twist clockwise just a little bit (equal to 3 – 4 moments on a time face). You want to do this very accurately so you never harm the swivel angle.
If you have the other issue where the pressure is too minimal, adhere to the same actions, except turn the twist ever so a little bit in a counterclockwise route.
Once your haircutting scissers are altered to the appropriate tension and you are sitll having issues, you may need to get them sharpened. Be sure to get them sharpened by a professional, someone who knows what s/he is doing.
With proper care, your haircutting scissers should last you a life-time.
-Sophie Li Wen
Top 5 Reasons to Buy new Hair Shears
Over years of visiting Hair Salons across America, we have seen what one would consider to be horrendous acts of neglect and abuse to Styling Shears. We sell shears, so we might be a little anal when it comes to taking good care of your shears. I’ve been surprised to see everything from using a pair with a broken tip, to a pair dinged up so badly that they won’t even close all the way.
You should probably consider replacing your Shears if:
1. You can’t tighten them any more. You have tightened the screw down so tight that it will not come loose any more, or it is stuck.
2. Rusty Shears are Crusty Shears! If you see any rust at all on your shears, replace them immediately. Before your clients see it.
3. You can’t get the screw out. Scissors need to be taken apart to be cleaned properly, which should be done daily.
4. Old Faithful: You love your shears so much that you have not even considered a new pair in the last 5 years. Chances are, you will be surprised at the ease of use and quality of steel that is used in newer shears.
If you fall into any of these categories, you better go to our shop and buy some new scissors immediately. In early 2009, Shiro Shears started using the new Vacuum Heat Treatment Process: Temperature is controlled of a cycle of time in Shiro Shears Advanced Heat Treatment Process. This process is what makes Shiro Shears stand out from others. This extra step is what gives the steel its extra strength, and is key in creating alloys capable of holding the “Ultimate Edge”.
Hair Scissor Sharpening Service
Shiro Shears is now offering sharpening & repair services for all your scissors. Our factory trained professionals are dedicated to the restoration process. Most dull or damaged shears need the blade angle and shape to be restored to original factory specifications, re-establishing the cutting-edge to like new. In addition to sharpening the blades, we also make sure that the shears are balanced and adjusted properly according to factory specifications before sending them back to you.
INCLUDED IN OUR SCISSOR SHARPENING SERVICE:
- Take apart Scissors and inspect thoroughly for any areas needing special attention.
- Disinfecting of scissors or shears from fungus and other bacteria
- Minor repairs such as small nick removal
- Razor Sharp Honing and Sharpening
- Lubrication
- Balance & Adjustment
- We also can add or replace finger rings, washers, finger tangs, stoppers and more!!!
SCISSOR RECONDITIONING WILL RESTORE YOUR HAIR SHEARS. SOMETIMES HAIR SHEARS REQUIRE ADDED CARE DUE TO: IMPROPER SHARPENING, EXCESS WEAR, AND RUST.
Some sharpeners sharpen at the wrong angle destroying the convex edge which decreases the efficiency of your hair shear. We are able to fix this problem for you by re-convexing your shear.
When a shear becomes worn, it needs re-convexing to increase the function of the shear.
To avoid rust, keep your hair shears away from hair chemicals. Letting chemicals set on any part of your shears will pit the surface, even stainless steel can be corroded by strong chemicals. Be sure to rinse any chemical solutions from your shears immediately. Also keep them dry and clean.
INCLUDED: If needed, we will replace the Finger Rest or Tang, Finger Rings, Washers, and Bumper. NOTE: We have parts for most makes of professional hair cutting shears.
Hair Shears Reviews
“Since I have received my pair of GV-55 styling shears, I have fallen in love with them. I’ve never gotten to use a pair of Swivel Shears before and the marked difference in decreased strain on my hand was a NICE surprise! Not only are they sharp, but they have a nice feel to them, not too heavy, and not too light. If you are looking for a nice pair of shears that won’t set you back an arm and a leg GET YOURSELF A PAIR OF SHIRO SHEARS!”
–TJ PoisalOwner of Hair on the Side Salon
Shiro Shears Other Products:
- best hair styling scissors
- best hair styling shears
- buy hair styling scissors
- Finger Ring Inserts
- Hair Cutting Scissors
- Hair Cutting Shears
- Hair Cutting Tools
- Hair Products
- Hair Scissors
- Hair Shears
- hair styling scissors
- Hair Styling Shears
- hair stylist scissors
- Hair Thinning Shears
- Hairdressing Shears
- hairstyling shears
- japanese hair cutting shears
- Japanese Hair Scissors
- Japanese Hair Shears
- japanese hairdressing scissors
- Japanese Shears
- Kelly Cardenas Collection
- new hair shears
- Payment Plans
- Scissor Sets
- scissors
- Scissors Cases
- shears
- Small Hair Shears
- Student Shears
- Styling Shears
- Swivel Shears
- Texturizing Shears
- Thinning Scissors
- Thumb Swivel Shears
- top hair scissors
- top hair styling shears
Your Shears Can Make or Break The Cut
I have heard it all from stylists about what you should and should not do when cutting curly hair, which got me thinking: What is the difference between shears and how they shape your hair?
For more information about this, I went straight to my local curly expert, Ron Valdez at Estilo Valdez Salon in Austin, TX. There are so many different types of shears on the market, each claiming that it is one and only tool you will need. Ron Valdez sings a different tune, “I cycle through six pairs of shears. You can’t tell which you will need to use until you cut down into the hair. Every head of hair is different, so it responds differently to each pair of scissors.”
How can you tell when you’re using the right pair or scissors? Valdez offers some advice, “Start off with one pair and (it) may change throughout the head. One pair won’t always cut it. When you close the shear and it glides through the hair and doesn’t push it out, that is the right type of shear for that hair.”
Not surprisingly, there are many types of haircutting scissors available on the market, including: barber shears, thinning shears, styling shears, tempered shears, left-handed shears and more.
One glance at these scissors will tell you just how different they are from each other. Each is designed to perform a specific task—some are used to create subtle effects while others are perfect for basic haircuts.
What Type of Shear is Best for You?
You have some choices to make before you select the right pair of scissors. Of course, you’ll also want to shop around for the best prices.
Type of Blades
Beveled blades feature one serrated edge and are ideal for layered cuts, tapered cuts and the “scissor over the comb” method.
Convex blades are razor sharp and promise a clean, smooth, flawless cut. They are ideal for slide cutting.
Type of Handles
Opposing grips feature handles of the same length that are symmetrical to the center screw. It is perfect for individuals who cut with the thumb and middle finger.
Offset grips feature a short thumb handle and a longer finger handle. This allows natural, fluid movement and is ideal for individuals who cut with the thumb and ring finger.
Crane grips feature a long finger handle and an angled thumb. This ensures less strain on the wrist and shoulder and allows a freer, open cut.
Types of Thumb Grips
Standard thumb scissors feature a removable and reversible finger resting piece that can be attached to either the left or right. This allows individuals greater versatility (with left and right hand use.
Cutaway thumb scissors do not feature the reversible finger resting piece, but does provide exceptional comfort.
Anatomic thumb scissors allow for greater radial movement due to its curved design. Thus it provides more freedom of movement for the stylist.
Rotating thumb scissors are a new advancement in the haircutting industry. They reduce hand and wrist strain and feature an open-hand grip design, which reduces thumb “travel” and creates a more comfortable experience for the stylist.
Length of Blade
Choosing the blade length is really a matter of comfort and preferred styling methods. You will find you probably need to utilize several different types of scissors, but your hand should feel comfortable no matter what size it is.
Short blades are useful for detailed touchups, such as cutting around the ears or very close to the skin. This type of blade is recommended for all stylists; chances are it will be used frequently for more intricate cutting. The blade should be no longer than 5.5 inches.
Long blades are ideal for cutting thick hair, slide cutting, scissor over comb methods, and bobs, to name a few.
Some other features that stylists may choose to focus on include the production material of the shears, the method of production of the shears and the tension system the shears provide.
So how can you get hands-on experience using various shears with different curl patterns? The new stylists at Estilio Valdez ask their curly friends to come in for a cut, and Valdez even puts an ad on Craigslist for all types of curls to receive a free cut while the stylists are learning how to shape and style curls correctly.
The best advice Ron could give me was, “It’s a craft and just like any other craft, you will master it over time.”
by Megan Dorcey
Experienced Stylists use Swivel Hair Shears
With twenty-one years of experience, colorist for Vidal Sassoon in London and owner of Salon 5th Avenue Hair & Spa Inc., Santiago Mojica couldn’t help but add the Shiro Swivel Set Combo to his collection. He couldn’t get past the quality and affordability of Shiro Shears. And as on of the most lavish and stylish Uptown Salons in San Diego, Santiago knows a good thing when he sees it!
Santiago was kind enough to put one of our Shiro stickers in the window of his salon. We absolutely love it when our customers give such great feedback and are willing to support us as we support them.